FitMatch

Air purifier filter · Breville

Breville Medium AntiViral HEPA-13 filter (Smart Air LAP300 / LAP308 / LAP408)

Part codeLAP040BLU0ZAN1
  • Replace every 12 months
  • Fits inside the fridge
  • Fits 3 models
Breville Medium AntiViral HEPA-13 filter (Smart Air LAP300 / LAP308 / LAP408)

Sellers from

$89.95

1 seller compared

The one-piece filter drum for the Smart Air (LAP300), Smart Air Connect (LAP308) and Smart Air Viral Protect Plus (LAP408): pre-filter, AntiViral HEPA-13 and activated carbon in a single 360-degree cartridge. Breville says change it every 6 to 12 months or 4,320 hours; the purifier shows a filter alert.

Reduces

  • Fine dust, pollen and allergens
  • Odours, smoke and gases (activated carbon)
  • Viral particles (AntiViral HEPA-13, tested to ISO 18184)
Fits
LAP300, LAP308, LAP408
Lasts
6–12 months / 4,320 hours
Every number this part goes by
Retail name:
BAP040
Retail name:
LAP040
Retail name:
LAP040BLU

Where to buy

Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.

How long it lasts

Replace every 12 months (Breville: every 6 to 12 months or 4,320 hours; the purifier shows a filter alert) — the appliance's filter light tells you when.

After fitting: After fitting, hold the filter button until the filter alert light goes out.

Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.

Not due yet?

This filter is due every 12 months. We'll email you when it's time — free, no spam.

Fitting it

A few minutes, no tools. Watch it done, then follow the steps.

Air Purifiers | How to use our range of air purifiers | Breville AUBreville Australia (official) · YouTube
  1. 1Switch the purifier off and unplug it.
  2. 2Twist the top cover anti-clockwise and lift it off.
  3. 3Lift the old filter drum out by its tabs, take the new one out of its plastic bag and drop it in.
  4. 4Refit the cover, plug in, and hold the filter button until the filter alert goes out.

Will it fit your appliance?

Type your model number and we'll check it against our fitment database.

Fits these models

Breville3 models

Common questions

Which filter fits the Breville LAP040BLU0ZAN1?
The Breville LAP040BLU0ZAN1 takes the Breville Medium AntiViral HEPA-13 filter (Smart Air LAP300 / LAP308 / LAP408) (part LAP040BLU0ZAN1). Compatible filters made to the same specification also fit.
How often should I replace the filter in my Breville LAP040BLU0ZAN1?
Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
Where can I buy the LAP040BLU0ZAN1 in Australia?
We track 1 Australian seller for the LAP040BLU0ZAN1; the lowest listed price when we last checked was A$89.95 at breville. Prices are re-checked daily and dated on this page.
How do I fit the LAP040BLU0ZAN1 in a Breville LAP040BLU0ZAN1?
No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.

Own a LAP040BLU0ZAN1 and this looks wrong? . Reports go to a person, not a bot.

Confirmed fitLAP040BLU0ZAN1 · from $89.95Compare sellers