Breville LAP168 filter
The Breville LAP168 takes the Breville Small AntiViral HEPA-13 filter (Smart Air Viral Protect Night Glow LAP168) (part LAP010BLU0ZAN1) as its filter; replace it every 12 months; Australian sellers list it from A$44.95 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your air purifier
Breville LAP168
Air purifier · Smart Air Viral Protect
Takes this filter
Small AntiViral HEPA-13 filter (Smart Air Viral Protect Night Glow LAP168)
LAP010BLU0ZAN1
The right filter for LAP168
Breville Small AntiViral HEPA-13 filter (Smart Air Viral Protect Night Glow LAP168)
- Replace every 12 months
- Fits inside the fridge
- Fits 1 model
The one-piece filter drum for the Smart Air Viral Protect Night Glow (LAP168): pre-filter, AntiViral HEPA-13 and activated carbon in a single 360-degree cartridge. Breville says change it every 6 to 12 months or 4,320 hours; the purifier shows a filter alert.
Reduces
- Fine dust, pollen and allergens
- Odours, smoke and gases (activated carbon)
- Viral particles (AntiViral HEPA-13, tested to ISO 18184)
- Fits
- LAP168
- Lasts
- 6–12 months / 4,320 hours
Every number this part goes by
- Retail name:
- BAP010
- Retail name:
- LAP010
- Retail name:
- LAP010BLU
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.
How long it lasts
Replace every 12 months (Breville: every 6 to 12 months or 4,320 hours; the purifier shows a filter alert) — the appliance's filter light tells you when.
After fitting: After fitting, hold the filter button until the filter alert light goes out.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 12 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Switch the purifier off and unplug it.
- 2Twist the top cover anti-clockwise and lift it off.
- 3Lift the old filter drum out by its tabs, take the new one out of its plastic bag and drop it in.
- 4Refit the cover, plug in, and hold the filter button until the filter alert goes out.
About your Breville LAP168
Breville air purifier, air purifier — Smart Air Viral Protect. Its filter is the Small AntiViral HEPA-13 filter (Smart Air Viral Protect Night Glow LAP168), part LAP010BLU0ZAN1, changed every 12 months.
Checking the model number: The model number is on the rating label on the bottom or back of the purifier; the old filter usually has its own code printed on the frame.
Fits these models
Breville1 model
Common questions
- Which filter fits the Breville LAP168?
- The Breville LAP168 takes the Breville Small AntiViral HEPA-13 filter (Smart Air Viral Protect Night Glow LAP168) (part LAP010BLU0ZAN1). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Breville LAP168?
- Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the LAP010BLU0ZAN1 in Australia?
- We track 1 Australian seller for the LAP010BLU0ZAN1; the lowest listed price when we last checked was A$44.95 at breville. Prices are re-checked daily and dated on this page.
- How do I fit the LAP010BLU0ZAN1 in a Breville LAP168?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
Own a LAP168 and this looks wrong? . Reports go to a person, not a bot.