How often should I replace the filter in my Philips AC1711?

Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.

Where can I buy the FY1700/30 in Australia?

We link to 1 Australian seller for the FY1700/30; the seller's page shows the current price.

How do I fit the FY1700/30 in a Philips AC1711?

No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.

Philips AC1711 filter

The Philips AC1711 takes the Philips FY1700/30 HEPA NanoProtect & Active Carbon Filter (1000 Series) (part FY1700/30) as its filter; replace it every 12 months. Fitment confirmed against the manufacturer's compatibility list.

Appliance confirmed before purchase

Not yours? Change

Your air purifier

Philips AC1711

Air purifier · 1000 Series

Takes this filter

FY1700/30 HEPA NanoProtect & Active Carbon Filter (1000 Series)

FY1700/30

The right filter for AC1711

Philips FY1700/30 HEPA NanoProtect & Active Carbon Filter (1000 Series)

Part codeFY1700/30

Replace every 12 months
Fits inside the fridge
Fits 2 models

Philips FY1700/30 HEPA NanoProtect & Active Carbon Filter (1000 Series)

Sellers from

—

1 seller compared

The combined HEPA NanoProtect and active-carbon filter for the 1000 Series (AC1711, AC1715). One filter, rated by Philips for a year; the washable pre-filter in front of it should be rinsed regularly.

Reduces

Fine dust, pollen and allergens
Odours and gases (active carbon layer)

Pack: 1 filter
Lifespan: Up to 1 year (Philips)

Every number this part goes by

Retail name:: FY1700

Where to buy

Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 6 September 2026.

ManufacturerGenuine partSee price

How long it lasts

Replace every 12 months — the appliance's filter light tells you when.

After fitting: Hold the filter reset button for about 3 seconds after fitting the new filter.

Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.

Not due yet?

This filter is due every 12 months. We'll email you when it's time — free, no spam.

Fitting it

A few minutes, no tools. Watch it done, then follow the steps.

We haven't found a clear video for this filter yet. The steps on the right cover it.

1Switch the purifier off and unplug it.
2Open the lower cover on the front of the tower and lift the old filter cartridge out.
3Take the new filter out of its plastic bag and drop it in with the tab facing you.
4Close the cover, plug in, and hold the filter reset button for about 3 seconds until the filter alert clears.

About your Philips AC1711

Philips air purifier, air purifier — 1000 Series. Its filter is the FY1700/30 HEPA NanoProtect & Active Carbon Filter (1000 Series), part FY1700/30, changed every 12 months.

Checking the model number: Tip the purifier back or turn it over: the type number (AC…/70, AC…/10, AMF…) is on the rating label on the bottom of the unit. The filter's own code (FY…/30) is printed on the old filter's frame.

Fits these models

Philips2 models

Common questions

Which filter fits the Philips AC1711?: The Philips AC1711 takes the Philips FY1700/30 HEPA NanoProtect & Active Carbon Filter (1000 Series) (part FY1700/30). Compatible filters made to the same specification also fit.
How often should I replace the filter in my Philips AC1711?: Every 12 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
Where can I buy the FY1700/30 in Australia?: We link to 1 Australian seller for the FY1700/30; the seller's page shows the current price.
How do I fit the FY1700/30 in a Philips AC1711?: No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.

Own a AC1711 and this looks wrong? . Reports go to a person, not a bot.