Philips AC2721 filter
The Philips AC2721 takes the Philips FY1410/30 NanoProtect HEPA Filter (1000i / 2000i 2-in-1) (part FY1410/30) as its filter; replace it every 24 months; Australian sellers list it from A$39.90 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your air purifier
Philips AC2721
Air purifier · 2000i Series
Takes this filter
FY1410/30 NanoProtect HEPA Filter (1000i / 2000i 2-in-1)
FY1410/30
The right filter for AC2721
Philips FY1410/30 NanoProtect HEPA Filter (1000i / 2000i 2-in-1)
- Replace every 24 months
- Fits inside the fridge
- Fits 6 models
The HEPA NanoProtect filter for the 1000i and 2000i Series 2-in-1 purifier-humidifiers (AC1214, AC1215, AC1217, AC2721, AC2726, AC2729). Philips rates it for up to two years; it pairs with the FY1413/30 active-carbon filter, which changes yearly, so most people buy both together.
Reduces
- Fine dust (PM2.5), pollen and allergens
- Bacteria and viruses (NanoProtect HEPA)
- Pack
- 1 filter
- Lifespan
- Up to 2 years (Philips)
- Pairs with
- FY1413/30 active-carbon filter, changed yearly
Every number this part goes by
- Retail name:
- FY1410
- Retail name:
- FY1410/40
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 6 September 2026.
How long it lasts
Replace every 24 months — the appliance's filter light tells you when.
After fitting: After fitting, hold the filter reset button on the purifier for about 3 seconds until the filter alert clears.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 24 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Switch the purifier off and unplug it.
- 2Pull the bottom edge of the front panel towards you, then lift the panel off.
- 3Lift out the old filter. Take the new filter out of its plastic bag — it does nothing while wrapped — and slot it in with the tab facing you.
- 4Refit the front panel, plug in, and hold the filter reset button for about 3 seconds until the filter alert clears.
About your Philips AC2721
Philips air purifier, air purifier — 2000i Series. Its filter is the FY1410/30 NanoProtect HEPA Filter (1000i / 2000i 2-in-1), part FY1410/30, changed every 24 months.
Also in this air purifier: Philips FY1413/30 Active Carbon Filter (1000i / 2000i 2-in-1) (every 12 months). Worth replacing together — one job, not two.
Checking the model number: Tip the purifier back or turn it over: the type number (AC…/70, AC…/10, AMF…) is on the rating label on the bottom of the unit. The filter's own code (FY…/30) is printed on the old filter's frame.
Fits these models
Common questions
- Which filter fits the Philips AC2721?
- The Philips AC2721 takes the Philips FY1410/30 NanoProtect HEPA Filter (1000i / 2000i 2-in-1) (part FY1410/30). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Philips AC2721?
- Every 24 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the FY1410/30 in Australia?
- We track 2 Australian sellers for the FY1410/30; the lowest listed price when we last checked was A$39.90 at janitorial_depot. Prices are re-checked daily and dated on this page.
- How do I fit the FY1410/30 in a Philips AC2721?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
Own a AC2721 and this looks wrong? . Reports go to a person, not a bot.