Dreame D20 Pro Plus main brush
The Dreame D20 Pro Plus takes the Dreame HyperStream Detangling DuoBrush (Aqua10 / Aqua20, L50 Ultra, Matrix10 Ultra, D20 Pro Plus) (part DRE-RMB13) as its main brush; replace it every 12 months; Australian sellers list it from A$49.95 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
Dreame D20 Pro Plus
Robot vacuum · D series
Takes this filter
HyperStream Detangling DuoBrush (Aqua10 / Aqua20, L50 Ultra, Matrix10 Ultra, D20 Pro Plus)
DRE-RMB13
The right main brush for D20 Pro Plus
Dreame HyperStream Detangling DuoBrush (Aqua10 / Aqua20, L50 Ultra, Matrix10 Ultra, D20 Pro Plus)
- Replace every 12 months
- Fits inside the fridge
- Fits 7 models
The two-piece HyperStream DuoBrush for the Aqua10 and Aqua20 families, L50 Ultra, Matrix10 Ultra and D20 Pro Plus. The split in the middle feeds hair towards the intake so less wraps.
- Style
- 2-piece detangling DuoBrush
- Dreame part
- RMB13
Every number this part goes by
- Retail name:
- RMB13
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.
How long it lasts
Replace every 12 months — the app reminds you.
After fitting: Reset the main-brush timer under Maintenance in the Dreame app.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 12 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Turn the robot over on a towel and release the tabs on the main-brush cover.
- 2Lift out both halves of the old DuoBrush.
- 3Fit the two new rollers with their gear ends outward, press the cover back until it clicks, and reset the main-brush timer in the Dreame app.
About your Dreame D20 Pro Plus
Dreame robot vacuum, robot vacuum — D series. Its main brush is the HyperStream Detangling DuoBrush (Aqua10 / Aqua20, L50 Ultra, Matrix10 Ultra, D20 Pro Plus), part DRE-RMB13, changed every 12 months.
Also in this robot vacuum: Dreame Dust Bag (D20 Pro Plus) (every 2 months), Dreame Mop Pad (L10 / L10s / L20 / L30 / L40 / L40s, X40 / X50 / X60 Ultra, Matrix10 Ultra, D20 Pro Plus) (every 6 months). Worth replacing together — one job, not two.
Checking the model number: Turn the robot over: the model name and serial are on the label on the underside. The model name is also on the top lid of most robots.
Fits these models
Common questions
- Which main brush fits the Dreame D20 Pro Plus?
- The Dreame D20 Pro Plus takes the Dreame HyperStream Detangling DuoBrush (Aqua10 / Aqua20, L50 Ultra, Matrix10 Ultra, D20 Pro Plus) (part DRE-RMB13).
- How often should I replace the main brush in my Dreame D20 Pro Plus?
- Every 12 months, or sooner if it looks worn.
- Where can I buy the DRE-RMB13 in Australia?
- We track 2 Australian sellers for the DRE-RMB13; the lowest listed price when we last checked was A$49.95 at robot_specialist. Prices are re-checked daily and dated on this page.
- How do I fit the DRE-RMB13 in a Dreame D20 Pro Plus?
- No tools, a few minutes: 3 steps, listed on this page with the replacement video where the maker has one.
Own a D20 Pro Plus and this looks wrong? . Reports go to a person, not a bot.