ECOVACS X1 Omni side brush
The ECOVACS X1 Omni takes the ECOVACS Side Brush (T20 Omni, X1 family, T10 Plus, T9, T8, N8, N10, NEO, 920 / 950, N7) (part D-SB04-0007) as its side brush; replace it every 3 months; Australian sellers list it from A$14.90 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
ECOVACS X1 Omni
Robot vacuum · X series
Takes this filter
Side Brush (T20 Omni, X1 family, T10 Plus, T9, T8, N8, N10, NEO, 920 / 950, N7)
D-SB04-0007
The right side brush for X1 Omni
ECOVACS Side Brush (T20 Omni, X1 family, T10 Plus, T9, T8, N8, N10, NEO, 920 / 950, N7)
- Replace every 3 months
- Fits inside the fridge
- Fits 20 models
The screw-free swing-arm side brush ECOVACS has used since the OZMO 920 / 950: T20 Omni, X1 Omni / Turbo / Plus, T10 Plus, T9, T8, N8, N10, NEO and N7. Sold as a pair in white or black; the fit is the same.
- Pack
- 2 brushes (pair)
- ECOVACS part
- D-SB04-0007 (white) / D-SB04-2147 (black)
Every number this part goes by
- Retail name:
- 201-2230-1100
- Retail name:
- 201-2230-1700
- Retail name:
- D-SB04-2147
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.
How long it lasts
Replace every 3 months — the app reminds you.
After fitting: Reset the side brush under Consumables in the ECOVACS Home app.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 3 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Turn the robot over on a towel.
- 2Pull the old side brush straight off its post.
- 3Push the new brush onto the post until it clicks, then reset the side brush under Consumables in the ECOVACS Home app.
About your ECOVACS X1 Omni
ECOVACS robot vacuum, robot vacuum — X series. Its side brush is the Side Brush (T20 Omni, X1 family, T10 Plus, T9, T8, N8, N10, NEO, 920 / 950, N7), part D-SB04-0007, changed every 3 months.
Also in this robot vacuum: ECOVACS Antibacterial Dust Bag (X1 Omni, T20 Omni / T20e Omni) (every 2 months), ECOVACS Washable Mopping Pads (X2 Omni / X2 Combo, X1 Omni / X1 Turbo, T20 Omni / T20e Omni) (every 6 months). Worth replacing together — one job, not two.
Checking the model number: Turn the robot over: the model name and serial are on the label on the underside. The model name is also on the top lid of most robots.
Fits these models
ECOVACS20 models
- N10 (side brush)
- N10 Plus (side brush)
- N7 (side brush)
- N8 (side brush)
- N8 Pro (side brush)
- N8 Pro+ (side brush)
- N8+ (side brush)
- NEO (side brush)
- OZMO 920 (side brush)
- OZMO 950 (side brush)
- T10 Plus (side brush)
- T20 Omni (side brush)
- T8 (side brush)
- T8 AIVI (side brush)
- T8+ (side brush)
- T9 (side brush)
- T9+ (side brush)
- X1 Omni (side brush)
- X1 Plus (side brush)
- X1 Turbo (side brush)
Common questions
- Which side brush fits the ECOVACS X1 Omni?
- The ECOVACS X1 Omni takes the ECOVACS Side Brush (T20 Omni, X1 family, T10 Plus, T9, T8, N8, N10, NEO, 920 / 950, N7) (part D-SB04-0007).
- How often should I replace the side brush in my ECOVACS X1 Omni?
- Every 3 months, or sooner if it looks worn.
- Where can I buy the D-SB04-0007 in Australia?
- We track 3 Australian sellers for the D-SB04-0007; the lowest listed price when we last checked was A$14.90 at ecovacs_au. Prices are re-checked daily and dated on this page.
- How do I fit the D-SB04-0007 in a ECOVACS X1 Omni?
- No tools, a few minutes: 3 steps, listed on this page with the replacement video where the maker has one.
Own a X1 Omni and this looks wrong? . Reports go to a person, not a bot.