ECOVACS X11 OmniCyclone filter
The ECOVACS X11 OmniCyclone takes the ECOVACS Antibacterial Filter (X8 Pro Omni, X8 Max Pro Omni, X11, T80 Omni, T80S Omni) (part DFI030037) as its filter; replace it every 3 months; Australian sellers list it from A$14.90 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
ECOVACS X11 OmniCyclone
Robot vacuum · X series
Takes this filter
Antibacterial Filter (X8 Pro Omni, X8 Max Pro Omni, X11, T80 Omni, T80S Omni)
DFI030037
The right filter for X11 OmniCyclone
ECOVACS Antibacterial Filter (X8 Pro Omni, X8 Max Pro Omni, X11, T80 Omni, T80S Omni)
- Replace every 3 months
- Fits inside the fridge
- Fits 6 models
The antibacterial filter ECOVACS lists for the X8 Pro Omni, X8 Max Pro Omni, X11 OmniCyclone, X11 Pro Omni, T80 Omni and T80S Omni. It clips to the back of the dust box; tap it out weekly and replace it every three months or when the app's consumable timer runs out.
Reduces
- Fine dust and allergens blown back into the room
- Pack
- 3 filters
- Antibacterial
- Yes (SILVADUR 930 treated)
- ECOVACS part
- DFI030037
Every number this part goes by
- Retail name:
- 201-2417-0001
- Retail name:
- ADFI030037
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.
How long it lasts
Replace every 3 months — the app reminds you.
After fitting: In the ECOVACS Home app open Consumables, tap the filter and choose Reset after fitting the new one.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 3 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Lift the robot's top cover and pull the dust box out by its handle.
- 2Press the clip on the back of the box and lift the old filter off.
- 3Clip the new filter on with the pleats facing the box, close the box and slide it back until it clicks.
- 4In the ECOVACS Home app open Consumables, tap Filter and choose Reset.
About your ECOVACS X11 OmniCyclone
ECOVACS robot vacuum, robot vacuum — X series. Its filter is the Antibacterial Filter (X8 Pro Omni, X8 Max Pro Omni, X11, T80 Omni, T80S Omni), part DFI030037, changed every 3 months.
Also in this robot vacuum: ECOVACS Anti-Tangle Main Brush (T50 Max Pro Omni, X11 OmniCyclone / X11 Pro Omni, X8 Max Pro Omni) (every 12 months), ECOVACS Antibacterial Roller Mop (X11 OmniCyclone / X11 Pro Omni, T80S Omni) (every 6 months). Worth replacing together — one job, not two.
Checking the model number: Turn the robot over: the model name and serial are on the label on the underside. The model name is also on the top lid of most robots.
Fits these models
Common questions
- Which filter fits the ECOVACS X11 OmniCyclone?
- The ECOVACS X11 OmniCyclone takes the ECOVACS Antibacterial Filter (X8 Pro Omni, X8 Max Pro Omni, X11, T80 Omni, T80S Omni) (part DFI030037). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my ECOVACS X11 OmniCyclone?
- Every 3 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the DFI030037 in Australia?
- We track 2 Australian sellers for the DFI030037; the lowest listed price when we last checked was A$14.90 at ecovacs_au. Prices are re-checked daily and dated on this page.
- How do I fit the DFI030037 in a ECOVACS X11 OmniCyclone?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
Own a X11 OmniCyclone and this looks wrong? . Reports go to a person, not a bot.