Roborock Qrevo L filter
The Roborock Qrevo L takes the Roborock Washable Filter (Qrevo MaxV / S / C / L / Curv / Edge) (part 8.02.0296) as its filter; replace it every 6 months; Australian sellers list it from A$39.90 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
Roborock Qrevo L
Robot vacuum · Qrevo
Takes this filter
Washable Filter (Qrevo MaxV / S / C / L / Curv / Edge)
8.02.0296
The right filter for Qrevo L
Roborock Washable Filter (Qrevo MaxV / S / C / L / Curv / Edge)
- Replace every 6 months
- Fits inside the fridge
- Fits 10 models
The washable filter Roborock's Australian store lists for the Qrevo MaxV, Qrevo S / S Pro, Qrevo C / C Pro, Qrevo L / L Pro and the Qrevo Curv, Edge and EdgeC. Roborock part 8.02.0296, two per pack; rinse fortnightly, replace when it stays grey.
- Pack
- 2 filters
- Washable
- Yes — rinse, no detergent, dry 24 h
- Roborock part
- 8.02.0296
Every number this part goes by
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.
How long it lasts
Replace every 6 months — the app reminds you.
After fitting: Reset the filter timer under Maintenance in the Roborock app.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 6 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Lift the robot's top lid and pull the dust bin out by its handle.
- 2Press the clip on the back of the bin and swing the old filter out.
- 3Clip the new filter in with the pleats facing the bin, close the bin and slide it back until it clicks.
- 4In the Roborock app open Maintenance, tap the filter and choose Reset.
About your Roborock Qrevo L
Roborock robot vacuum, robot vacuum — Qrevo. Its filter is the Washable Filter (Qrevo MaxV / S / C / L / Curv / Edge), part 8.02.0296, changed every 6 months.
Also in this robot vacuum: Roborock Dust Bag (Qrevo / Saros / S8 MaxV Ultra docks) (every 2 months), Roborock Rotating Mop Cloths (Qrevo, Qrevo MaxV / Master / C / L / Slim) (every 6 months), Roborock Rotating Mop Cloths (Qrevo L / L Pro) (every 6 months), Roborock Side Brush (Saros, Qrevo Curv / Edge, Q10) (every 6 months). Worth replacing together — one job, not two.
Checking the model number: Flip the robot over: the white label on the underside lists the model (e.g. S7 MaxV, Q7 Max+, Qrevo Curv) and serial. The Roborock app also shows the model under Settings, then Device info.
Fits these models
Common questions
- Which filter fits the Roborock Qrevo L?
- The Roborock Qrevo L takes the Roborock Washable Filter (Qrevo MaxV / S / C / L / Curv / Edge) (part 8.02.0296). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Roborock Qrevo L?
- Every 6 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the 8.02.0296 in Australia?
- We track 1 Australian seller for the 8.02.0296; the lowest listed price when we last checked was A$39.90 at roborock_au. Prices are re-checked daily and dated on this page.
- How do I fit the 8.02.0296 in a Roborock Qrevo L?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
Own a Qrevo L and this looks wrong? . Reports go to a person, not a bot.