Roborock S8 Pro Ultra filter
The Roborock S8 Pro Ultra takes the Roborock Washable Filter (S7 / S8 series) (part RR-S7LW-01) as its filter; replace it every 6 months; Australian sellers list it from A$24.95 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
Roborock S8 Pro Ultra
Robot vacuum · S series
Takes this filter
Washable Filter (S7 / S8 series)
RR-S7LW-01
The right filter for S8 Pro Ultra
Roborock Washable Filter (S7 / S8 series)
- Replace every 6 months
- Fits inside the fridge
- Fits 9 models
The washable filter that sits on the dust bin of the S7 and S8 families. Rinse it under the tap every couple of weeks and let it dry fully; replace it when it stays grey or the app's filter timer runs out.
Reduces
- Fine dust and allergens blown back into the room
- Pack
- 2 filters
- Washable
- Yes — rinse, no detergent, dry 24 h
- App timer
- 150 hours of cleaning
Every number this part goes by
- Retail name:
- 8.02.0082
- Retail name:
- SDLW05RR
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 6 September 2026.
How long it lasts
Replace every 6 months — the app reminds you.
After fitting: In the Roborock app open Maintenance, tap the filter and choose Reset after fitting the new one.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 6 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Lift the robot's top lid and pull the dust bin out by its handle.
- 2Press the clip on the back of the bin and swing the old filter out.
- 3Clip the new filter in with the pleats facing the bin, close the bin and slide it back until it clicks.
- 4In the Roborock app open Maintenance, tap the filter and choose Reset.
About your Roborock S8 Pro Ultra
Roborock robot vacuum, robot vacuum — S series. Its filter is the Washable Filter (S7 / S8 series), part RR-S7LW-01, changed every 6 months.
Also in this robot vacuum: Roborock Dust Bag (S8 / Q series auto-empty docks) (every 2 months), Roborock Mop Cloth (Q10V+, S8 Pro / S8 Pro Ultra) (every 6 months), Roborock Side Brush (S / Q / Qrevo series) (every 6 months). Worth replacing together — one job, not two.
Checking the model number: Flip the robot over: the white label on the underside lists the model (e.g. S7 MaxV, Q7 Max+, Qrevo Curv) and serial. The Roborock app also shows the model under Settings, then Device info.
Fits these models
Common questions
- Which filter fits the Roborock S8 Pro Ultra?
- The Roborock S8 Pro Ultra takes the Roborock Washable Filter (S7 / S8 series) (part RR-S7LW-01). Compatible filters made to the same specification also fit.
- How often should I replace the filter in my Roborock S8 Pro Ultra?
- Every 6 months. Flow slows and performance drops off as the filter fills up, so it's worth doing on time.
- Where can I buy the RR-S7LW-01 in Australia?
- We track 4 Australian sellers for the RR-S7LW-01; the lowest listed price when we last checked was A$24.95 at robot_specialist. Prices are re-checked daily and dated on this page.
- How do I fit the RR-S7LW-01 in a Roborock S8 Pro Ultra?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
Own a S8 Pro Ultra and this looks wrong? . Reports go to a person, not a bot.