Roborock Qrevo 2 Pro side brush
The Roborock Qrevo 2 Pro takes the Roborock Side Brush (Saros, Qrevo Curv / Edge, Q10) (part SDBS04RR) as its side brush; replace it every 6 months; Australian sellers list it from A$39.95 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
Roborock Qrevo 2 Pro
Robot vacuum · Qrevo
Takes this filter
Side Brush (Saros, Qrevo Curv / Edge, Q10)
SDBS04RR
The right side brush for Qrevo 2 Pro
Roborock Side Brush (Saros, Qrevo Curv / Edge, Q10)
- Replace every 6 months
- Fits inside the fridge
- Fits 17 models
The newer push-fit side brush for the Saros, Qrevo Curv, Qrevo Edge and Q10 robots. Not interchangeable with the screw-on brush used by older models.
- App timer
- 200 hours of cleaning
- Fitting
- Pulls off and pushes on, no screw
Every number this part goes by
- Retail name:
- 8.02.0372
- Retail name:
- 8.02.0380
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 1 August 2026.
How long it lasts
Replace every 6 months — the app reminds you.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 6 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Turn the robot over on a towel and find the side brush at the front corner.
- 2Pull the old brush straight off its post — there is no screw on this generation.
- 3Push the new brush on until it clicks, then reset the side-brush timer under Maintenance in the app.
About your Roborock Qrevo 2 Pro
Roborock robot vacuum, robot vacuum — Qrevo. Its side brush is the Side Brush (Saros, Qrevo Curv / Edge, Q10), part SDBS04RR, changed every 6 months.
Also in this robot vacuum: Roborock Dust Bag (Qrevo / Saros / S8 MaxV Ultra docks) (every 2 months), Roborock Main Brush (Qrevo Curv / Edge, Saros 10 / 10R / 20) (every 12 months), Roborock Rotating Mop Cloths (Saros 10R / 20 / Z70, Qrevo Edge 2) (every 6 months). Worth replacing together — one job, not two.
Checking the model number: Flip the robot over: the white label on the underside lists the model (e.g. S7 MaxV, Q7 Max+, Qrevo Curv) and serial. The Roborock app also shows the model under Settings, then Device info.
Fits these models
Roborock17 models
- Q10V+ (side brush)
- Q7B (side brush)
- Q7T+ (side brush)
- Qrevo 2 Pro (side brush)
- Qrevo C (side brush)
- Qrevo C Pro (side brush)
- Qrevo Curv (side brush)
- Qrevo Edge (side brush)
- Qrevo Edge 2 (side brush)
- Qrevo Edge 2 Pro (side brush)
- Qrevo Edge C (side brush)
- Qrevo L (side brush)
- Qrevo L Pro (side brush)
- Saros 10 (side brush)
- Saros 10R (side brush)
- Saros 20 (side brush)
- Saros Z70 (side brush)
Common questions
- Which side brush fits the Roborock Qrevo 2 Pro?
- The Roborock Qrevo 2 Pro takes the Roborock Side Brush (Saros, Qrevo Curv / Edge, Q10) (part SDBS04RR).
- How often should I replace the side brush in my Roborock Qrevo 2 Pro?
- Every 6 months, or sooner if it looks worn.
- Where can I buy the SDBS04RR in Australia?
- We track 3 Australian sellers for the SDBS04RR; the lowest listed price when we last checked was A$39.95 at robot_specialist. Prices are re-checked daily and dated on this page.
- How do I fit the SDBS04RR in a Roborock Qrevo 2 Pro?
- No tools, a few minutes: 3 steps, listed on this page with the replacement video where the maker has one.
Own a Qrevo 2 Pro and this looks wrong? . Reports go to a person, not a bot.