Roborock Qrevo S5V main brush
The Roborock Qrevo S5V takes the Roborock Main Brush (Qrevo Curv / Edge, Saros 10 / 10R / 20) (part RR-ZS4-QrevoCurv-01) as its main brush; replace it every 12 months; Australian sellers list it from A$34.00 as of 1 August 2026. Fitment confirmed against the manufacturer's compatibility list.
Appliance confirmed before purchase
Not yours? Change
Your robot vacuum
Roborock Qrevo S5V
Robot vacuum · Qrevo
Takes this filter
Main Brush (Qrevo Curv / Edge, Saros 10 / 10R / 20)
RR-ZS4-QrevoCurv-01
The right main brush for Qrevo S5V
Roborock Main Brush (Qrevo Curv / Edge, Saros 10 / 10R / 20)
- Replace every 12 months
- Fits inside the fridge
- Fits 20 models
The split DuoDivide roller for the Qrevo Curv, Qrevo Edge and Saros robots. The gap in the middle sheds hair towards the ends so less wraps.
- App timer
- 300 hours of cleaning
- Style
- DuoDivide split roller
Every number this part goes by
- Retail name:
- 8.02.0363
- Retail name:
- 8.02.0381
- Retail name:
- SDZS10RR
Where to buy
Every seller we track for this part, cheapest first. Genuine is the manufacturer's own part; compatible is a third-party filter made to fit. Prices are re-checked daily where the seller publishes them. Last checked 6 September 2026.
How long it lasts
Replace every 12 months — the app reminds you.
Flow slows and taste drops off as the filter fills up. Changing on time is the whole point of the filter.
Not due yet?
This filter is due every 12 months. We'll email you when it's time — free, no spam.
Fitting it
A few minutes, no tools. Watch it done, then follow the steps.
- 1Turn the robot over on a towel. The main brush is the roller in the middle behind a cover with two tabs.
- 2Squeeze the tabs, lift the cover off, and lift the old roller out from the end away from the gear.
- 3Drop the new roller in with the gear end matching the old one, press the cover back until both tabs click.
- 4Reset the main-brush timer under Maintenance in the Roborock app.
About your Roborock Qrevo S5V
Roborock robot vacuum, robot vacuum — Qrevo. Its main brush is the Main Brush (Qrevo Curv / Edge, Saros 10 / 10R / 20), part RR-ZS4-QrevoCurv-01, changed every 12 months.
Checking the model number: Flip the robot over: the white label on the underside lists the model (e.g. S7 MaxV, Q7 Max+, Qrevo Curv) and serial. The Roborock app also shows the model under Settings, then Device info.
Fits these models
Roborock20 models
- Qrevo 2 Pro (main brush)
- Qrevo C (main brush)
- Qrevo C Pro (main brush)
- Qrevo Curv (main brush)
- Qrevo Curv 2 Flow (main brush)
- Qrevo Curv S5X (main brush)
- Qrevo CurvX (main brush)
- Qrevo Edge (main brush)
- Qrevo Edge 2 (main brush)
- Qrevo Edge 2 Pro (main brush)
- Qrevo Edge C (main brush)
- Qrevo Edge S5A (main brush)
- Qrevo EdgeT (main brush)
- Qrevo S5V (main brush)
- QX Revo Ultra (main brush)
- S10 MaxV Ultra (main brush)
- Saros 10 (main brush)
- Saros 10R (main brush)
- Saros 20 (main brush)
- Saros 20 Sonic (main brush)
Common questions
- Which main brush fits the Roborock Qrevo S5V?
- The Roborock Qrevo S5V takes the Roborock Main Brush (Qrevo Curv / Edge, Saros 10 / 10R / 20) (part RR-ZS4-QrevoCurv-01).
- How often should I replace the main brush in my Roborock Qrevo S5V?
- Every 12 months, or sooner if it looks worn.
- Where can I buy the RR-ZS4-QrevoCurv-01 in Australia?
- We track 4 Australian sellers for the RR-ZS4-QrevoCurv-01; the lowest listed price when we last checked was A$34.00 at robot_specialist. Prices are re-checked daily and dated on this page.
- How do I fit the RR-ZS4-QrevoCurv-01 in a Roborock Qrevo S5V?
- No tools, a few minutes: 4 steps, listed on this page with the replacement video where the maker has one.
Own a Qrevo S5V and this looks wrong? . Reports go to a person, not a bot.